其实很多时候,群众是很好说话的,因为他们所需要的并非特权,而是公平
–当年明月《明朝那些事儿》
由于是win本地部署,jmeter部署看前面文章即可,本篇主要记录influxdb+granfna
一、influxdb
1、influxdb官网下载win的安装包
2、解压至本地
3、修改配置文件,下载下来的配置文件为:influxdb.conf;一般win都推荐influxdb.config使用config后缀的配置,其实两种配置文件都试了试,都可用
4、修改配置文件内容,路径改成自己本地路径
meta部分:
[meta] # Where the metadata/raft database is stored dir = "D:\\usuallySoftwere\\influxdb-1.7.7-1\\meta" # Automatically create a default retention policy when creating a database. retention-autocreate = true # If log messages are printed for the meta service logging-enabled = true
data部分:
[data] # The directory where the TSM storage engine stores TSM files. dir = "D:\\usuallySoftwere\\influxdb-1.7.7-1\\data" # The directory where the TSM storage engine stores WAL files. wal-dir = "D:\\usuallySoftwere\\influxdb-1.7.7-1\\wal"
retention部分:
[retention] # Determines whether retention policy enforcement enabled. enabled = true # The interval of time when retention policy enforcement checks run. check-interval = "30m"
shard-precreation部分:
[shard-precreation] # Determines whether shard pre-creation service is enabled. enabled = true # The interval of time when the check to pre-create new shards runs. check-interval = "10m" # The default period ahead of the endtime of a shard group that its successor # group is created. advance-period = "30m"
http部分:
[http] # Determines whether HTTP endpoint is enabled. enabled = true # Determines whether the Flux query endpoint is enabled. # flux-enabled = false # Determines whether the Flux query logging is enabled. # flux-log-enabled = false # The bind address used by the HTTP service. bind-address = ":8086" # Determines whether user authentication is enabled over HTTP/HTTPS. auth-enabled = false # The default realm sent back when issuing a basic auth challenge. # realm = "InfluxDB" # Determines whether HTTP request logging is enabled. # log-enabled = true # Determines whether the HTTP write request logs should be suppressed when the log is enabled. # suppress-write-log = false # When HTTP request logging is enabled, this option specifies the path where # log entries should be written. If unspecified, the default is to write to stderr, which # intermingles HTTP logs with internal InfluxDB logging. # # If influxd is unable to access the specified path, it will log an error and fall back to writing # the request log to stderr. # access-log-path = "" # Filters which requests should be logged. Each filter is of the pattern NNN, NNX, or NXX where N is # a number and X is a wildcard for any number. To filter all 5xx responses, use the string 5xx. # If multiple filters are used, then only one has to match. The default is to have no filters which # will cause every request to be printed. # access-log-status-filters = [] # Determines whether detailed write logging is enabled. # write-tracing = false # Determines whether the pprof endpoint is enabled. This endpoint is used for # troubleshooting and monitoring. # pprof-enabled = true # Enables a pprof endpoint that binds to localhost:6060 immediately on startup. # This is only needed to debug startup issues. # debug-pprof-enabled = false # Determines whether HTTPS is enabled. # https-enabled = false # The SSL certificate to use when HTTPS is enabled. # https-certificate = "/etc/ssl/influxdb.pem" # Use a separate private key location. # https-private-key = "" # The JWT auth shared secret to validate requests using JSON web tokens. # shared-secret = "" # The default chunk size for result sets that should be chunked. # max-row-limit = 0 # The maximum number of HTTP connections that may be open at once. New connections that # would exceed this limit are dropped. Setting this value to 0 disables the limit. # max-connection-limit = 0 # Enable http service over unix domain socket # unix-socket-enabled = false # The path of the unix domain socket. # bind-socket = "/var/run/influxdb.sock" # The maximum size of a client request body, in bytes. Setting this value to 0 disables the limit. # max-body-size = 25000000 # The maximum number of writes processed concurrently. # Setting this to 0 disables the limit. # max-concurrent-write-limit = 0 # The maximum number of writes queued for processing. # Setting this to 0 disables the limit. # max-enqueued-write-limit = 0 # The maximum duration for a write to wait in the queue to be processed. # Setting this to 0 or setting max-concurrent-write-limit to 0 disables the limit. # enqueued-write-timeout = 0
graphite部分:
[[graphite]] # Determines whether the graphite endpoint is enabled. enabled = true database = "jmeter" # retention-policy = "" bind-address = ":2003" protocol = "tcp" consistency-level = "one" # These next lines control how batching works. You should have this enabled # otherwise you could get dropped metrics or poor performance. Batching # will buffer points in memory if you have many coming in. # Flush if this many points get buffered # batch-size = 5000 # number of batches that may be pending in memory # batch-pending = 10 # Flush at least this often even if we haven't hit buffer limit # batch-timeout = "1s" # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max. # udp-read-buffer = 0 ### This string joins multiple matching 'measurement' values providing more control over the final measurement name. # separator = "." ### Default tags that will be added to all metrics. These can be overridden at the template level ### or by tags extracted from metric # tags = ["region=us-east", "zone=1c"] ### Each template line requires a template pattern. It can have an optional ### filter before the template and separated by spaces. It can also have optional extra ### tags following the template. Multiple tags should be separated by commas and no spaces ### similar to the line protocol format. There can be only one default template. # templates = [ # "*.app env.service.resource.measurement", # # Default template # "server.*", # ] ### ### [collectd] ### ### Controls one or many listeners for collectd data. ###
可以看到基本上都是对配置的打开,graphite部分和http部分涉及自定义配置
5、启动influxdb,指定配置文件
命令:influxd -config influxdb.config
6、启动成功
二、Granfna
1、官网下载win安装包
2、配置influxdb库信息(注意:库有设置密码就填入密码,未设置密码便不用填写,直接连接即可)
3、导入jmeter模板(模板很多,百度一下,或者官网查找)
三、jmeter配置
1、添加后置监听器进行配置
后端监听器实现选择:org.apache.jmeter.visualizers.backend.influxdb.InfluxdbBackendListenerClient
参数配置:
influxdbUrl :http://localhost:8086/write?db=jmeter application :jmeter measurement :jmeter summaryOnly : false samplersRegex :* 其余默认即可
配置完成。
原文地址:http://www.cnblogs.com/richered/p/16845014.html
1. 本站所有资源来源于用户上传和网络,如有侵权请邮件联系站长!
2. 分享目的仅供大家学习和交流,请务用于商业用途!
3. 如果你也有好源码或者教程,可以到用户中心发布,分享有积分奖励和额外收入!
4. 本站提供的源码、模板、插件等等其他资源,都不包含技术服务请大家谅解!
5. 如有链接无法下载、失效或广告,请联系管理员处理!
6. 本站资源售价只是赞助,收取费用仅维持本站的日常运营所需!
7. 如遇到加密压缩包,默认解压密码为"gltf",如遇到无法解压的请联系管理员!
8. 因为资源和程序源码均为可复制品,所以不支持任何理由的退款兑现,请斟酌后支付下载
声明:如果标题没有注明"已测试"或者"测试可用"等字样的资源源码均未经过站长测试.特别注意没有标注的源码不保证任何可用性